Need help?Do you have a question about the Kenwood ProTalk DIGITAL NX-P1200NV and is the answer not in the manual?
General| IP Rating | IP54/55 |
|---|---|
| Digital Protocol | NXDN |
| Battery Type | Lithium-Ion |
| Digital Modulation | 4FSK |
| Analog Compatibility | Yes |
| Operating Temperature Range | -30 °C to +60 °C |
| Power Output | 5W |
Instructions for attaching the antenna to the transceiver.
Steps for attaching and detaching the battery pack.
Procedure for attaching the belt clip to the transceiver.
Guide for securing the protective cap on the accessory jacks.
Steps for connecting external audio accessories.
Description of the selector knob for channel changes.
Explanation of the LED indicator status meanings.
How to turn the transceiver on/off and adjust volume.
Function of the PTT switch for transmitting.
Functionality and programming of the Side 1 button.
Functionality and programming of the Side 2 button.
Procedure to turn the transceiver on.
Steps to adjust the audio volume level.
How to navigate and select different zones.
Method for choosing a specific channel.
Instructions for initiating a voice call.
How to receive voice transmissions.
Procedure to turn the transceiver off.
Table explaining LED indicator colors and their meanings.
Overview of the programming process for different models.
Configuration of NXDN IDs and zone assignments.
Steps for configuring channel parameters like frequency.
Default analog and digital channel settings for NX-P1200NV.
Mapping of zone numbers to compatible model names.
Mapping of zone numbers to compatible model names.
Mapping of zone numbers to compatible model names.
Mapping of zone numbers to compatible model names.
Mapping of zone numbers to compatible model names.
Mapping of zone numbers to compatible model names.
How to configure the unique identification code for NXDN systems.
Step-by-step guide to configure the Reserved Group ID.
Steps to select a zone number for transceiver operation.
How to set the operating frequency for a channel.
How to set the channel type (Analog, NXDN, Mixed).
Configuration for transmit mode (Analog/NXDN) in Mixed mode.
Setting Quiet Talk (QT) and Digital Quiet Talk (DQT) codes.
Steps to configure the Radio Access Number for NXDN.
How to select High, Medium, or Low transmit power.
Procedure to verify current channel configuration details.
Table of programmable functions for Side buttons.
Guide to reprogram Side 1 and Side 2 buttons.
Function to lock or unlock transceiver buttons.
Feature to send a calling alert to other parties.
Controls audio output between internal and external speakers.
How to jump to and return from the home channel.
Procedure to set the current channel as the home channel.
How to make an individual call during a group call.
How to switch the transceiver's transmit power to low.
Deactivates signaling (RAN/QT/DQT) for open squelch.
Temporarily deactivates signaling for open squelch.
Initiates or stops channel scanning in the current zone.
Removes a channel from the scan sequence temporarily.
Enables or disables audio scrambling or data encryption.
Reduces the volume level of the speaker.
Opens squelch to hear all signals, deactivating signaling.
Temporarily opens squelch to hear all signals.
Prevents accidental changes to channels or zones.
Procedure to turn off the Super Lock function.
Decreases or increases the zone number.
Decreases or increases the channel number.
Uses a different channel for transmission or standby.
Sends a pre-configured CW message.
Adjusts the volume level of beep tones.
Receives uplink signals directly, outside repeater coverage.
Switches zones using the selector instead of channels.
Explanation of VOX and Semi-VOX transmission modes.
Steps to activate VOX and set the gain level.
Limits continuous transmission duration to prevent channel blocking.
Reduces power consumption during idle periods.
Alerts user when the battery charge is low.
Prevents transmission on an occupied channel.
Explains when audio voice announcements are made.
Procedure to restore transceiver settings to default values.
To Next Page