To Next PageTo Next Page
Need help?Do you have a question about the Kenwood RA-5000 and is the answer not in the manual?
General| Type | Stereo Receiver |
|---|---|
| Tuning range | FM, MW |
| Frequency Response | 20Hz to 20kHz |
| Input Sensitivity | 2.5mV (MM), 200mV (line) |
| Output | 200mV (line) |
| Speaker Load Impedance | 8Ω to 16Ω |
| Input Impedance | 47kΩ (MM), 47kΩ (line) |
Unpack the unit carefully and check all accessories.
Guidelines for disposing of old electrical equipment and batteries in the EU.
Repeats HDTV video and high-quality audio via HDMI for entertainment.
Reproduces music signals with high fidelity by turning off display and analog video circuitry.
Offers various surround modes for maximum enjoyment of video software.
Adjusts bass frequency from subwoofer and speakers for better sound phase.
Corrects deviation between video and audio timing.
Identifies and explains the functions of the main unit's buttons and displays.
Details the functions of each button on the remote control unit.
Guidelines for operating the remote control from a distance.
Instructions for inserting batteries into the remote control.
Important precautions and guidelines for connecting components and the unit.
Recommendations for positioning speakers for optimal surround sound.
Diagrams and instructions for connecting speakers to the RV-7000 model.
Diagrams and instructions for connecting speakers to the RV-6000 model.
Diagrams and instructions for connecting speakers to the RA-5000 model.
Step-by-step guide for connecting wires using screw terminals.
Step-by-step guide for connecting wires using push-type terminals.
Explains how to connect components via HDMI and use HDMI functions.
Instructions for connecting an audio player to the unit.
Guide for connecting portable devices to the front AV AUX jacks.
Instructions for connecting AM loop and FM antennas for broadcast reception.
Select speaker use and size (e.g., front, center, surround).
Adjust volume level for each speaker for balanced output.
Set the distance between each speaker and the listening position.
Set the frequency limit for bass reproduction from speakers.
Adjust Low Frequency Effect level and audio/video delay (Lip Sync).
Configure the automatic power-off function for energy saving.
Select whether audio output goes to speakers or TV.
Overview of setting up HDMI control functions and audio output.
Steps to confirm basic video and audio output via HDMI.
Verify that HDMI Link and Power Control functions are working.
Steps to power on the unit and speakers, and select input mode.
Match input mode to audio input type for digital and analog sources.
Connect TV audio back to the unit using the HDMI MONITOR terminal.
Table showing which input signals work with different listen modes across models.
Diagrams and listen modes for RV-7000 (7.1/6.1) and RV-6000 (5.1/2ch).
Selects optimal acoustic field for music, cinema, or games.
Enhances low-frequency emphasis.
Adjusts low (bass) and high (treble) frequency levels.
Fine-tune output levels for individual speakers based on source content.
Adjust input level for analog sources to prevent clipping.
Compresses dynamic range for easier listening at low volumes.
Expands front channel acoustic field for wider soundstage.
Moves the center of the acoustic field forward or backward.
Adjusts the output level of the center speaker.
Distributes center audio to front left/right speakers for enhanced width.
Connect headphones for private listening.
Selects display brightness level, including turning off illumination.
Temporarily silences the audio output.
Covers speaker disconnections, volume, mute, input selection, and wiring.
Addresses issues with single speakers, surround/center sound, and signal format compatibility.
Deals with sound cut-off, BD/DVD playback, video recording, and broadcast audio.
Covers display being off, unit turning off spontaneously, and audio output with TV input.
Addresses issues with video not outputting or being disturbed.
Covers inability to receive stations and interference.
Troubleshooting steps for non-responsive remote controls.
