To Next PageTo Next Page
Need help?Do you have a question about the Kenwood RV-7000 and is the answer not in the manual?
General| 3D | Yes |
|---|---|
| Analog signal format system | NTSC, PAL |
| Receiver type | Surround |
| RMS rated power | 150 W |
| Audio output channels | 5.0 channels |
| Total Harmonic Distortion (THD) | 0.01 % |
| Power output per channel (20-20KHz@8 Ohm) | - W |
| AirPlay | No |
| Display | - |
| Product color | Black |
| Audio decoders | Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS Neo:6, DTS-HD |
| Volume control | Rotary |
| Apple docking compatibility | Not supported |
| Supported radio bands | AM, FM |
| Dimensions (WxDxH) | 430 x 384 x 159 mm |
| HDMI ports quantity | 5 |
| HDMI in | 4 |
| Digital audio coaxial in | 1 |
| Digital audio optical in | 2 |
| Power consumption (standby) | 0.5 W |
| Power consumption (typical) | 200 W |
| Connectivity technology | Wired |
| Speakers connectivity type | Clamp terminals |
Weight and Dimensions| Weight | 900 g |
|---|
Important warnings regarding electrical shock and fire hazards.
Instructions for unpacking the unit and checking for all included accessories.
Guidance on proper disposal of old electrical and electronic equipment and batteries for EU countries.
Instructions for cleaning the unit and precautions regarding contact cleaner use.
General guidelines for safe operation, including reading and following instructions.
Precautions for installation, ventilation, electrical safety, and environmental hazards.
Safety advice for cleaning, servicing, replacement parts, and damage assessment.
Transfers HDTV video and high-quality audio, enabling 3D video and high-quality audio entertainment.
Reproduces music with high fidelity by disabling display and analog video circuitry.
Offers various surround modes for maximum enjoyment from video software.
Simplifies speaker settings by selecting room type and listening position for automatic audio correction.
Explanation of icons, illustrations, and key indicators used in the manual.
Introduction to detailed speaker setup procedures and their flow for optimal listening.
Detailed identification and function of buttons, knobs, and indicators on the main unit.
Explanation of the unit's standby mode and indicator light.
Detailed identification and function of buttons on the remote control unit.
Guidelines for operating the remote control unit, including range and component control.
Step-by-step instructions for inserting batteries into the remote control unit.
Explanation of the main display indicators and their meanings.
Indicators for selected listen modes and recognized input signal formats.
Important precautions and guidelines for making audio and video connections.
Diagrams and advice for optimal placement of speakers for RV-7000 and RV-6000 models.
Placement recommendations for front and front height speakers for optimal audio.
Guidelines for positioning center, surround, and subwoofer speakers for immersive sound.
Placement recommendations for surround back speakers for rear sound imaging.
Diagram detailing speaker terminal connections for the RV-7000 model.
Guidelines on speaker impedance, short circuits, and correct polarity for optimal sound.
Diagram detailing speaker terminal connections for the RV-6000 model.
Diagram detailing speaker terminal connections for the RA-5000 model.
Instructions for stripping, inserting, and tightening wires in screw-type terminals.
Instructions for stripping, inserting, and releasing levers in push-type terminals.
Diagrams showing how to connect playback components and TV monitors using HDMI cables.
Explanation of HDMI setup requirements, video signal flow, and audio signal flow.
Diagram showing connections A (HDMI) and B (VIDEO) to the TV monitor.
Diagram illustrating analog (A) and optical digital (B) audio connections for a CD player.
Diagram showing connections for audio (A/B), video (C), and TV for a DVD player.
Diagram showing connections for audio (A/B), video (C), and TV for a video player.
Guide to connecting an audio player using analog audio output.
Instructions for connecting portable devices like video cameras to the front AV AUX jacks.
Illustrations for connecting AM loop, FM indoor, and FM outdoor antennas.
Warning regarding the skill and safety precautions needed for outdoor antenna installation.
Procedure to turn the unit ON and OFF using the main unit or remote control.
Step-by-step guide to entering Easy Setup mode, selecting room size, and listening position.
Visual guides for listening room sizes and common listening positions for speaker setup.
Table detailing settings for speaker type, size, and connection for RV-7000.
Adjusting speaker output levels and distances from the listening position.
Setting crossover frequencies and Low Frequency Effect levels for bass management.
Adjusting audio delay for lip sync and configuring the automatic power saving function.
Detailed speaker setup options and settings specific to the RV-6000 model.
Detailed speaker setup options and settings specific to the RA-5000 model.
Procedure to adjust speaker volume levels using test tones for balanced output.
Guidance on selecting speaker sizes (Large/Normal) based on their capability.
Tables and procedure for measuring and inputting speaker distances for various models.
Procedure to select the crossover frequency from a list of options.
Adjusting the LFE level for enhancing bass tone effects in Dolby Digital and DTS signals.
Configuring the Auto Power Save function to automatically turn off the system after inactivity.
Procedure to select and set the audio delay time for lip synchronization.
Selecting the audio output destination (unit speakers or TV) for HDMI input.
Overview of the HDMI setup process, listing available control functions.
Details on setting HDMI audio output, Lip Sync, Link Set, and Power Control.
Detailed steps for setting the audio delay time for lip synchronization.
Enabling HDMI Link and configuring power interlocking between components.
Steps to check video display and audio output after connecting HDMI components.
Tests to verify HDMI Link and Power Control functionality with connected devices.
Procedure to turn on the unit and connected monitor/player components.
Guide to setting the input mode automatically or manually for digital/analog sources.
Activating or deactivating the speaker output using the SPEAKERS ON/OFF button.
Procedure to select a source, start playback, and adjust volume.
Guidance on selecting listen modes and fine-tuning surround effects.
Diagrams for connecting ARC-compatible and incompatible TV monitors.
Using STRAIGHT DECODE and PURE AUDIO modes for enhanced sound quality.
Procedure to switch between and cancel STRAIGHT DECODE or PURE AUDIO modes.
Table showing listen mode compatibility with different input signal types across models.
Diagrams of surround system layouts for RV-7000 and RV-6000 models.
Diagrams of 5.1ch surround and 2ch stereo system speaker placements.
List of available listen modes for different speaker configurations and system types.
Procedure to select listen modes using the LISTEN MODE key.
Explanation of Dolby Virtual Speaker modes available for the RA-5000.
Using the DISPLAY key to view input signal names and channel counts.
Procedure to turn Virtual Surround or Dolby Virtual Speaker ON or OFF.
Steps for tuning into FM/AM radio stations, including auto and manual tuning methods.
Using TUNING keys to select stations and understanding TUNED/ST indicators.
Details on PS, PTY, and RT functions for enhanced radio reception.
Automated storage of up to 40 FM stations, including Radio Data System stations, into preset memory.
Procedure for tuning and storing stations into manual presets using the MEMORY key.
Steps to select and receive stored radio stations using numeric keys.
Procedure to cycle through presets sequentially using the P.CALL keys.
Steps to activate PTY search and select program types for station tuning.
Explanation of the PS name, RT text, and frequency display modes.
Choosing Active EQ modes (Music, Cinema, Game) or turning it off.
Activating Bass Boost for enhanced low-frequency emphasis.
Selecting whether to enable or disable tone adjustments.
Procedure to adjust Bass and Treble levels using the tone controls.
Fine-tuning individual speaker output levels based on the playing source.
Adjusting input levels for analog sources and enabling Midnight mode for night listening.
Activating Panorama, Dimension, and Center settings for enhanced sound field effects.
Procedure to adjust speaker levels using sound adjustment menus.
Steps to adjust input level to prevent clipping on analog sources.
Activating or deactivating Midnight mode, and its compatibility with audio formats.
Steps to turn Panorama mode ON or OFF for enhanced sound staging.
Procedure to adjust the dimension setting for front/rear acoustic field movement.
Steps to adjust the center speaker output level.
Procedure to adjust center width for distributing audio to left and right speakers.
Instructions for connecting headphones and disabling speakers for private listening.
Selecting display brightness levels for different room lighting conditions.
Procedure to temporarily mute the audio output using the MUTE button.
Guide to operating Kenwood BD/DVD players using the unit's remote control unit.
Troubleshooting steps for issues with no sound, including cord checks and volume settings.
Steps to resolve issues where sound is not output from a single speaker.
Troubleshooting problems with playing desired signal formats like Dolby Digital or DTS.
Diagnosing and resolving issues where sound cuts off during playback.
Solutions for display-related issues and no audio output when TV input is selected.
Troubleshooting steps for problems with video output or disturbance.
Solutions for radio stations not being received or interference problems.
Steps to resolve issues with remote control operation, including range and mode selection.
Instructions for resetting the unit to factory default settings when inoperable.
Definitions and explanations for Dolby Digital, EX, Pro Logic II, IIx, IIz, and Digital Plus.
Definitions and explanations for DTS Digital Surround, ES, Neo:6, and 96/24 formats.
Definitions for DTS-HD formats, PCM, and DSD audio signal formats.
Explanations of HDMI features like Deep Color, x.v.Color, Lip Sync, and Audio Return Channel.
Detailed technical specs for audio output power, impedance, and HDMI terminals.
Technical specs for FM/AM tuning ranges, power consumption, and dimensions.
Space provided to record unit's model and serial number for dealer or service information.
