Kenwood RV-7000 User Manual

English
13
Before use
Display
Display
SP (speaker)
Lights up when the
speakers are on.
Listen mode/Input signal
format indicators
TONE
Lights up when the
tone setting is on.
MUTE
Blinks when muting
is on.
CLIP
Lights up when the input level is
too high.
AUTO
Lights up when the tuning
mode is "AUTO".
ST.
Lights up when stereo
broadcasting is tuned.
TUNED
Lights up when a radio
station is tuned.
Character display
PTY
Lights up when searching a radio
station by program type.
RDS
Lights up when receiving an
Radio Data System station.
Band indicators
Lights up the selected
broadcast band
indicator.
AUTO DETECT
Lights up when the input
mode is set to "AUTO".
HDMI
Lights up when the
components connected
with HDMI are
recognized.
ACTIVE EQ
Lights up when the
Active EQ is on.
STRAIGHT
Lights up when the Straight
Decode Mode is on.
Virtual Surround
Lights up when the
Virtual Surround is on.
STEREO
Lights up when the
Listen mode is Stereo.
B60-5827-08_00_En.indd 13 10.8.3 11:07:42 AM

Kenwood RV-7000 Specifications

General

3D	Yes
Analog signal format system	NTSC, PAL
Receiver type	Surround
RMS rated power	150 W
Audio output channels	5.0 channels
Total Harmonic Distortion (THD)	0.01 %
Power output per channel (20-20KHz@8 Ohm)	- W
AirPlay	No
Display	-
Product color	Black
Audio decoders	Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS Neo:6, DTS-HD
Volume control	Rotary
Apple docking compatibility	Not supported
Supported radio bands	AM, FM
Dimensions (WxDxH)	430 x 384 x 159 mm
HDMI ports quantity	5
HDMI in	4
Digital audio coaxial in	1
Digital audio optical in	2
Power consumption (standby)	0.5 W
Power consumption (typical)	200 W
Connectivity technology	Wired
Speakers connectivity type	Clamp terminals

Weight and Dimensions

Weight	900 g