Kenwood RDX-760 User Manual

Illustrates the layout and ports of the main unit's exterior.

Provides step-by-step instructions for disassembling the unit for repair.

Shows the functional interconnections of the audio system's main components.

Explains the operational principles and functionality of the audio system's circuits.

Describes the process of setting initial conditions and initializing the system.

Details the initialization procedures for the CD and cassette deck mechanisms.

Explains the error codes displayed by the unit.

Lists the preset frequencies for the tuner across different destinations.

Details tuner destination settings based on DIP switch configurations.

Explains how to enter and operate the receiver in test mode.

Describes the main microprocessor and its peripheral connections.

Details the function of each pin on the main microprocessor and expander ICs.

Explains the pin functions for CD and parallel-serial expander ICs.

Covers the procedures for adjusting tuner, CD player, and cassette deck functions.

Details the calibration steps for the tuner section for various models.

Explains how to enter and operate the CD player in various test modes.

Details specific adjustments for CD player components like laser power and tracking.

Outlines adjustment procedures for the cassette deck, including head alignment and bias.

Illustrates the electrical wiring connections between different units of the system.

Shows the internal block diagram of the CD changer mechanism.

Provides a visual breakdown of the CD player mechanism parts.

Shows a visual breakdown of the cassette deck mechanism components.

Provides a visual breakdown of the main unit's external and internal parts.

Lists all available parts with their numbers, descriptions, and destination codes.