Kenwood TH-F7E Service Manual

61
BAL
Volume Balance
Description:
Gets or sets the volume balance between A and B bands.
Menu Item #
n/a
Function:
While receiving on the A and B bands at the same time, one band’s audio output may
be too loud. This function adjusts the volume balance level of the bands.
Send:
Status:
BAL
Modify:
BAL [val]
Return:
BAL [val]
Where:
[val]
see Balance Table.
Notes:
Default value is 2 (both A and b bands equal).
Example:
Sent:
BAL
Requesting status of Balance.
Return:
BAL 2
Transceiver says that Balance is set to 2.
Sent:
BAL 0
Requesting balance to be A band only.
Return:
BAL 0
Confirming that balance to be A band only.

Kenwood TH-F7E Specifications

General

Frequency Range TX	144-146 MHz, 430-440 MHz
Receiver System	Double conversion superheterodyne
Impedance	50 Ohms
Modes	FM, AM, WFM
Battery Type	Lithium-Ion
Receiver Sensitivity	0.16 µV (12dB SINAD)
Selectivity	12 kHz (-6 dB), 25 kHz (-60 dB)
Voltage	7.4 V
Dimensions	58 x 140 x 35 mm
Output Power	5 / 2.5 / 0.5 / 0.05 W
RF Power Output	5 W (VHF), 5 W (UHF)