Need help?Do you have a question about the Kenwood TH-G71A and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TH-G71A |
| Category | Transceiver |
| Language | English |
Outlines the main features of the KENWOOD FM transceiver.
Lists the specific models TH-G71A and TH-G71E covered by this manual.
Lists essential safety precautions to prevent fire, personal injury, or transceiver damage.
Identifies transceiver controls and explains VFO and Memory Recall modes.
Details the various indicators and information shown on the transceiver's display.
Instructions for switching power, adjusting volume, and setting the squelch level.
Guides on selecting bands, tuning frequencies, and initiating transmissions.
Explains the menu system and provides steps for accessing and navigating it.
Details the available menu items and their default settings for configuration.
Explains how repeaters work and the initial steps for accessing them.
How to set the transmit frequency offset and direction for repeater use.
Guides on activating the tone function and selecting a specific tone frequency.
Details the function that automatically sets offset and tone for repeater access.
Explains the difference between simplex and split memory channel configurations.
Step-by-step instructions for saving frequencies and related data into memory channels.
Procedures for retrieving and erasing stored frequencies and data from memory.
How to assign names to memory channels and switch display modes.
Instructions for recalling the Call channel and modifying its stored data.
Procedures for performing partial (VFO) and full (memory) resets of the transceiver.
Explains the different modes (Time-Operated, Carrier-Operated, Seek) for scan resume.
Steps to choose the desired scan resume mode through the menu.
How to perform VFO scan and Memory scan operations.
Methods for excluding memory channels from scan and performing MHz scan.
How to set up and perform program scans with defined frequency limits.
Instructions for using Call/VFO Scan and Call/Memory Scan.
Guides on storing frequencies and selecting/using priority scan methods.
How to activate CTCSS and select a tone frequency for filtered communication.
Function to automatically identify incoming CTCSS tones from received signals.
Covers making DTMF calls, TX Hold, and Autopatch features.
Instructions for saving and verifying DTMF numbers for automatic dialing.
Details TX Inhibit, Transceiver Lock, Automatic Power Off, and Battery Saver features.
Covers Lamp, Beep, AM/FM mode selection, and Tone Alert functions.
How to directly enter frequencies or memory channel numbers using the keypad.
Guidance on transceiver service, repair, and exterior cleaning.
How to connect external power sources and other equipment like microphones or TNCs.
To Next Page
