To Next PageTo Next Page
Need help?Do you have a question about the Kenwood TK-3312 and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TK-3312 |
| Category | Transceiver |
| Language | English |
Information on disposing of old equipment and copyright notices.
Important safety measures for transceiver operation and handling.
Warnings about hazardous locations and general usage cautions.
Critical dangers associated with battery pack mishandling, short-circuiting, and heat.
Warnings against piercing, jarring, soldering, or reverse-connecting the battery pack.
Restrictions on charging, storage, and use of damaged or abnormal battery packs.
List of accessories included with the transceiver.
Step-by-step guide for attaching and detaching the battery pack.
Instructions for installing the antenna and belt clip.
Installing covers for audio jacks and connecting speaker/microphone accessories.
Guide on how to properly charge the transceiver's battery pack.
Procedures for powering the transceiver and adjusting audio volume.
Setting up and using a password for transceiver security.
How to select desired operating zones and channels.
Fundamental procedures for transmitting and receiving communications.
How to start, stop, and manage scan modes including priority scanning.
Temporarily removing channels from the scanning sequence.
Managing scan lists by adding/deleting channels and understanding scan revert.
Overview of signaling options like OST, 5-Tone, DTMF, and FleetSync.
Making and receiving selective calls to specific stations.
Sending and receiving pre-programmed status messages.
Reviewing, deleting, and managing stored messages.
Handling short data messages and sending GPS location data.
Using Autodial, Stun, and DTMF number display functions.
Setting and editing the transceiver's unique identification number.
Making and receiving calls using 5-tone signaling protocols.
Enabling VOX for hands-free transmission and adjusting sensitivity.
Adjusting transmit power and utilizing calling alert tones.
Securing the transceiver with key lock and sending GPS data.
Initiating emergency calls and activating the Lone Worker safety feature.
Enabling direct communication without a repeater.
Activating and configuring the voice scrambler for secure communication.
Using monitor and squelch functions and adjusting squelch level.
Managing the display and keypad backlight.
Instantly selecting the lowest channel of the lowest zone.
Understanding Time-Out Timer, Battery Saver, and power/signal indicators.
Managing busy channels, companding for clarity, and PTT ID.
