Need help?Do you have a question about the Kenwood TK-5910 and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TK-5910 |
| Category | Transceiver |
| Language | English |
Detailed pinout and specifications for the D-sub 25-pin accessory connector.
Detailed pinout and specifications for the 9-pin accessory connector.
Detailed pinout and specifications for the 12-pin microphone connector.
Information regarding the antenna connector impedance.
Information regarding legal restrictions, service, and user responsibilities for transceiver operation.
Critical warnings about explosive atmospheres, radio frequency exposure, and blasting caps.
Legal information concerning copyrights for the transceiver's embedded firmware.
Warning about potential harmful interference from RF energy and unauthorized modifications.
Details on FCC compliance for Class B digital devices and measures to correct interference.
Essential precautions to prevent fire, personal injury, and equipment damage.
List of items included with the transceiver upon purchase.
Specifies the necessary tools for installing the transceiver.
Instructions for connecting the power cable to the vehicle's power system.
Guidance on physically mounting the transceiver unit in the vehicle.
Instructions for connecting the antenna and power cables to the transceiver.
Steps for mounting the microphone hanger for convenient access.
Overview of the physical layout and controls of the KCH-14 panel.
How to turn the transceiver on and off using the power switch.
Using GRP and CH controls for zone and channel navigation.
Explanation of the PF 1-5 keys and their functions.
Explains the various icons and symbols displayed on the KCH-14 screen.
Overview of the physical layout and controls of the KCH-15 panel.
How to turn the transceiver on and off using the power switch.
Using GRP and CH controls for zone and channel navigation.
Using the MON and SCN keys for monitoring and scanning operations.
Explanation of the PF 1-5 keys and their functions.
Explains the various icons and symbols displayed on the KCH-15 screen.
Diagram and description of the rear panel for specific models.
Diagram and description of the rear panel for specific models.
Instructions for turning the transceiver on and off.
Procedure for entering and managing the transceiver password.
How to control the audio volume level using the VOL control.
Guide to navigating and selecting desired zones and channels.
Steps and tips for making a transmission using the PTT switch.
Procedure for initiating group calls in P25 mode.
Procedure for initiating individual calls in P25 mode.
How to receive and monitor group calls in P25 mode.
How to receive and respond to individual calls in P25 mode.
How to initiate and stop the scanning function.
Method to temporarily exclude channels from the scan sequence.
Explanation of how priority channels function within scan mode.
Configuration options for the channel selected after scanning stops.
Steps to modify the scan list for conventional channels.
How to reprogram priority settings if enabled by the dealer.
Guide to adjusting priority channel settings in single/multi-zone modes.
Explanation of keys used for FleetSync paging modes.
Visual representation of how to navigate FleetSync modes.
Steps for initiating a selective call to a specific station or group.
How to handle an incoming selective call.
Information on fleet and ID numbers for Selcall communication.
Procedure for transmitting status messages.
How incoming status messages are handled.
Accessing and managing stored messages.
Instructions for sending and receiving short text messages.
Instructions for sending and receiving long text messages.
How to transmit location data using an installed GPS unit.
Various methods for initiating DTMF calls.
Using pre-programmed numbers for quick DTMF calls.
Functionality for disabling a lost or stolen transceiver remotely.
Procedures for initiating calls to telephone numbers.
How to handle incoming telephone calls.
Initiating status updates during trunking operations.
Steps to activate the emergency call function.
How to deactivate the emergency call mode.
Enabling and using scrambler/encryption for secure communications.
How to choose a scrambler code for FM operation.
How to choose an encryption key for P25 operation.
Procedure for removing encryption keys from the transceiver.
Consequences of incorrect password attempts on encryption keys.
Explanation of tone/code based squelch control.
How to reprogram QT/DQT codes for channels.
How 2-tone signaling works to open squelch.
How DTMF signaling works to open squelch.
Reference to FleetSync for signaling information.
Description of MDC-1200 data system.
Step-by-step guide to setting the internal clock.
How to activate and use the Auxiliary A, B, and C ports.
Using Channel Up, Down, Select, and Recall functions.
How to jump to frequently used zones and channels.
Managing display output and switching between internal/external speakers.
Using Horn Alert and Intercom features.
Adjusting LCD brightness and using the Monitor function.
Managing Operator Selectable Tone and Public Address.
Using Scan features and Scrambler/Encryption.
Details on Selcall and Selcall + Status operations.
Managing site lock and adjusting squelch levels.
Searching for sites and registering tactical group channels.
Using Zone Up, Down, and Select functions.
Functionality to limit continuous transmission duration.
How the transceiver displays received signal strength.
How the compander feature improves audio clarity.
Preventing transmission on busy channels.
Indications for being out of range or network issues.
Information about the Push-To-Talk ID feature.
Overview of the voice recorder's capabilities.
How the auto recording feature captures signals.
Recording and playing back voice memos.
Setting up automatic responses to incoming calls.
Playing back recorded conversations, memos, or messages.
How the voice guide announces settings and channel changes.
To Next Page
