Kenwood TK-6110 Brochure & Specs

TK-6110
Compact VHF Low Band Mobile Radio
• QT/DQT Encode & Decode
• Operator Selectable Tone
•
Two Tone Decode
• DTMF Encode & Decode
• Time Out Timer
• Busy Channel Lockout
• 15 Pin Accessory Connector
• MIL-Spec / Noise-Cancel Microphone
• M-Type Antenna Connector
• Ignition Sense
• Timed Power Off
• Horn Alert
• Cloning
• PC Programming & Tuning
• MIL-STD-810 C/ D/ E
GENERAL FEATURES
• 70 W (29.7-37.0, 35.0-50.0 MHz)
• 32 Channels
• Single Priority Scan
• 8 Character Alphanumeric LCD
• 3 Digit Sub-Display and Icons
•
Transmit / Busy / Call Allert / Warn LED
• Up/Down Channel Selector
• Volume Knob
• Power On/Off Button
• 7 Programmable Radio Keys
• Front Panel Speaker
• Noise Blanker Function
• Encryption / ANI Board Control
• Emergency Call Features

Kenwood TK-6110 Specifications

General

frequency range type 1	29.7-37.0 MHz
frequency range type 2	35.0-50.0 MHz
number of channels	32
channel spacing	20 kHz / 25 kHz
channel step	5 kHz

Power

operating voltage	13.6 V DC ±15%
current drain standby	< 0.6 A
current drain receive	< 2.4 A
current drain transmit	< 15 A
duty cycle transmit	20%

Operating Environment

operating temperature range	-22˚f ~ +140˚f (-30˚c ~ +60˚c)
frequency stability	±0.0005%
antenna impedance	50 Ω

Receiver

sensitivity (12dB SINAD)	0.25µV
selectivity	75 dB
intermodulation distortion	70 dB
spurious response	70 dB
audio output	10W at less than 5% distortion

Transmitter

RF output power	70 W
type of emission	16K0F3E
spurious response	62 dB
FM hum & noise	50 dB
microphone impedance	600 Ω

Weight and Dimensions

dimensions (W x H x D)	6-1/4 x 2 x 6-1/4 in. (160 x 50 x 160 mm)
weight (net)	3.5 lbs. (1.6kg)