Need help?Do you have a question about the Kenwood TM-701A and is the answer not in the manual?
General| Mode | FM |
|---|---|
| Voltage | 13.8 V DC |
| Weight | 1.2 kg |
| Frequency Range | 144-148 MHz |
| Channel Step | 5, 10, 12.5, 15, 20, 25 kHz |
| Audio Output | 2 W |
| Receiver Sensitivity | 0.16 μV (12 dB SINAD) |
Warnings against opening the unit, exposure to heat/sunlight, and ventilation.
Advice on avoiding dust, humidity, unstable surfaces, and wet plugs.
Guidelines for cleaning the transceiver safely.
Detailed technical data including frequency range, power, sensitivity, and dimensions.
List of items that should be included in the transceiver package.
Steps for securely mounting the transceiver bracket in a vehicle.
Guidelines for connecting power and antenna for mobile and fixed stations.
Explanation of the front panel controls and their functions.
Details on microphone connector pinout and specific key functions (VFO, MR).
Explains the function of MHz, Call, and Shift/Alert keys.
Details the operations of Tone/Alt, Rev/Step, and Band/Dup keys.
Explanation of the LCD display indicators and their meaning.
Explanation of antenna, power, fuse, and external speaker connections.
Pinout and description of microphone connectors for different versions.
Steps to connect, power on, and adjust controls for receiving signals.
How to change the operating frequency in VFO mode.
How to select the frequency step size.
How to program VFO tuning limits for specific band segments.
How to transmit, power levels, and operate in duplex mode.
Information on memory backup battery and resetting the microprocessor.
Details on special memory channels, their functions, and storage capabilities.
How to enter data into memory channels.
Procedures for entering simple and odd split memory data.
How to recall stored memory channels.
Procedure for storing data into the call channel.
Copying memory contents to VFO without altering memory.
Overview of scan types and hold/resume programming.
How to perform band scans and programmable band scans.
Scanning memory channels, dual scan modes.
How to lock out specific memory channels from scanning.
How to monitor a specific memory channel for activity.
Setting offsets for repeaters and using the reverse function.
Using tone signals and CTCSS for repeater access.
Selecting tone frequencies and understanding CTCSS operation.
Using the autopatch feature for telephone calls.
How to set up the tone alert for incoming signals.
Overview of factory alignment, service procedures, and warranty claims.
Table of symptoms, causes, and corrective actions for issues.
Installation guide for the optional CTCSS Tone Squelch unit.
Instructions for operating the transceiver using the RC-10 remote controller.
To Next Page
