Kenwood TM-741A User Manual

CGOO/ANAD
144/220 MHz FM MULTI BANDER
TM-641A
144/440 MHz FM MULTI BANDER
TM-741A
144/430 MHz FM MULTI BANDER
TM-741A
144/430 MHz FM MULTI BANDER
TM-741E
INSTRUCTION MANUAL
KENWOOD CORPORATION
©PRINTED IN JAPAN B62-0082-10(K)(T)
92/12 111098765432191/12 11109876

Kenwood TM-741A Specifications

General

Output Power	50W (VHF), 35W (UHF)
Channels	200
Power Requirement	13.8V DC
Frequency Range	144-148 MHz, 430-450 MHz
Modes	FM

Summary

1. BEFORE OPERATION

2. SPECIFICATIONS and ACCESSORIES

2-1. SPECIFICATIONS

Technical details and operating parameters of the transceiver models.

3. INSTALLATION INSTRUCTIONS

4. OPERATION

4-1. OPERATING CONTROLS

Identification and function of the transceiver's main operational controls, including front panel, microphone, and display.

4-2. RECEIVER OPERATION

Steps for operating the receiver, including frequency selection, scanning, and band management.

4-3. TRANSMITTER OPERATION

Procedures for transmitting, including power levels, alerts, and bandwidth selection.

4-4. MEMORY

Functions for storing, recalling, and managing frequencies and settings in memory channels and banks.

4-5. SCAN

Options and procedures for scanning frequency bands and memory channels.

4-6. REPEATER OPERATION

Configuration for repeater access, including offset, tone, CTCSS, and autopatch.

4-7. DTSS (Dual Tone Squelch System)

Using DTSS for selective squelch, code selection, and repeater functions.

4-8 PAGING (Requires optional DTU-2)

Paging functions, including code selection, transmission, monitoring, and lockout.

4-9. TONE ALERT SYSTEM

6. MAINTENANCE

OIN CASE OF DIFFICULTY

Troubleshooting common problems and their corrective actions based on symptoms.