Kenwood TM-V71A User Manual

INSTRUCTION MANUAL
144/440 MHz FM DUAL BANDER
TM-V71A
144/430 MHz FM DUAL BANDER
TM-V71A/ TM-V71E
© B62-1926-10 (K, E, M4)
09 08 07 06 05 04 03 02 01
NOTIFICATION
This equipment complies with the essential requirements of
Directive 1999/5/EC.
The use of the warning symbol means the equipment is subject
to restrictions of use in certain countries.
This equipment is requires a licence and is intended for use in the
countries as below.
AT BE DK FI FR DE GR IS
IE IT LI LU NL NO PT ES
SE CH GB CY CZ EE HU LV
LT MT PL SK SI BG RO
ISO3166

Kenwood TM-V71A Specifications

General

Input voltage	13.8 V
Microphone included	Yes
Product type	Car CB radio
Product color	Black
Housing material	-
Frequency range	45.05 - 455000 MHz
Channels quantity	1000 channels

Weight and Dimensions

Depth	213.1 mm
Width	140 mm
Height	43 mm

Summary

User Notices and Safety Precautions

FCC Warnings and Information

FCC compliance, warnings about modifications, and interference correction measures.

Environmental and Operational Safety

Precautions for condensation, explosive atmospheres, RF transmissions, and blasting caps.

General Precautions and Warnings

DC Power Source and Cable Safety

Requirements for the 13.8V DC power source and safety notes for the DC power cable.

Mobile Installation and Vehicle Safety

Safety precautions for mobile installation and potential interference with vehicle electronics.

Preparation and Getting Acquainted

Initial Setup Procedures

Supplied accessories, mobile installation, power and antenna connections, and panel orientation.

Basic Operations Guide

Power ON/OFF, volume/squelch adjustment, band/mode selection, and transmitting.

Menu Mode and Repeater Access

How to access the menu system and procedures for operating through repeaters.

Memory Channel Management

Memory Channel Types and Storage

Understanding memory channel types and storing simplex/repeater/odd-split frequencies.

Memory Channel Operations

Recalling, clearing, naming, and transferring memory data to VFO.

Programmable Memory (PM) Functions

Storing and recalling transceiver configurations in PM channels with application examples.

Scan Operations and Squelch Systems

Scan types, resume methods, memory lockout, CTCSS, DCS, and DTMF functions.

Data and Wireless Operations

Transceiver Reset Procedures

Performing transceiver resets (VFO, PART, PM, FULL) via key operation or menu.

Installation and Connections

Mobile Installation Guidelines

Guidance on selecting a safe and convenient location for mobile installation.

Power Cable and Antenna Connections

Mobile Operation Power Cable Wiring

Instructions for connecting the DC power cable for mobile operation.

Antenna Connection and Safety

Connecting Antenna and Feed Line

Connecting antenna and feed line, with cautions on transmitting without antenna.

Antenna Connection Safety Cautions

Important cautions regarding antenna connection and lightning protection.

Basic Operation: Power and Volume

Power ON/OFF Procedure

Procedure for turning the transceiver ON and OFF, including password entry.

Adjusting Transceiver Volume

How to adjust the audio volume level using the control.

Squelch Adjustment and Band Selection

Adjusting the Squelch Level

Procedure for setting the squelch level to eliminate background noise.

Selecting Operating Band A or B

How to select between band A and band B for operation.

Dual/Single Band Mode Selection

Switching Between Dual and Single Band Modes

Switching between dual band and single band operation modes.

Frequency Band Selection

Changing Default Frequency Bands

How to change the default frequency bands for bands A and B.

Operating Mode Selection

VFO Mode Operation

Manually changing the operating frequency in VFO mode.

Memory Channel Mode Operation

Quickly selecting frequently used frequencies from memory.

Call Channel Mode and Transmitting

Call Channel Mode Usage

Selecting a preset channel for immediate calls or emergencies.

Transmitting Audio Signals

Steps involved in transmitting audio signals from the transceiver.

Menu Mode Navigation and Configuration

Accessing the Menu System

How to access and navigate the transceiver's menu system.

Overview of Menu Configuration

Overview of menu items and their configurable settings.

Detailed Menu Configuration

Menu Item Details and Reference Pages

Detailed list of menu items, settings, and reference pages.

Storing Repeater Frequencies

Storing Simplex and Standard Repeater Frequencies

Steps to store simplex and standard repeater frequencies in memory.

Storing Odd-Split Repeater Frequencies

How to store odd-split repeater frequencies for non-standard offsets.

Recalling and Managing Memory Channels

Recalling Memory Channels

Procedure to retrieve stored frequencies and data from memory channels.

Programmable Memory (PM) Usage

Storing and Recalling PM Data

Steps to save transceiver configurations into PM channels and load them.

Scan Operations Overview

Scan Features and Types

Using scan features for hands-off monitoring of frequencies.

Scan Resume Method and VFO Scan

Selecting a Scan Resume Method

Choosing how the transceiver resumes scanning after detecting a signal.

VFO Scan Operation

Scanning all frequencies within the current band.

Memory Scan and Channel Lockout

Memory Scan Operation

Monitoring all stored Memory channels for activity.

Group Scan and Memory Linking

Group Scan Operation

Scanning memory channels organized into specific groups.

Program Scan Setup and Usage

Setting Scan Limits for Program Scan

Defining frequency ranges for Program Scan.

Operating the Program Scan Feature

How to operate the Program Scan feature.

CTCSS System Operation

Using the CTCSS Function

How to activate and use the CTCSS function for selective calls.

DCS System Operation

Using the DCS Function

How to activate and use the DCS function for selective calls.

Advanced Repeater Operations

Cross-Band/Locked-Band Operation

Using the transceiver for cross-band or locked-band repeater operations.

Transceiver Reset Procedures

Resetting via Key Operation

Performing transceiver resets (VFO, PART, PM, FULL) via key combinations.

Resetting via Menu Mode

Performing transceiver resets through the menu system.

Troubleshooting Common Problems

Problem Resolution Guide

Common operational problems and their corrective actions.