Need help?Do you have a question about the Kenwood TS-950 series and is the answer not in the manual?
General| Type | HF Transceiver |
|---|---|
| Modes | CW, AM, FM, FSK |
| Receiver Type | Triple conversion superheterodyne |
| Audio Output | 2 W into 8 Ω |
| IF Frequencies | 1st: 8.83 MHz, 2nd: 455 kHz |
| Antenna Impedance | 50 Ω |
| Supply Voltage | 13.8 VDC |
Safety and setup checks before connecting the transceiver to a computer for operation.
Explanation of serial data transfer and control mechanisms using RTS/CTS lines for data flow.
Defines command format, including alphabetical characters, parameters, and the terminator character.
Guide to understanding command table elements such as applicable models, function, parameter, and format.
Comprehensive list of command parameters, including their format, number of columns, and function.
Important notes and warnings for using commands correctly, including program execution delays.
An overview of all available commands, their functions, relevant pages, and applicable models.
Describes VFO A, VFO B, and SUB frequency selection and readout commands.
Explains how to display the transceiver's current condition using various parameters.
Explains the memory channel setting command and its parameters.
Explains the memory display command, parameters, and usage for recalling frequencies.
Details the memory entry command and its parameters for setting channels.
To Next Page
