Need help?Do you have a question about the Kenwood TS180S and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | TS180S |
| Category | Transceiver |
| Language | English |
Information on the final stage transistors and protection circuits.
Detailed explanation of the receiver circuit block.
Detailed explanation of the transmitter circuit block.
Explanation of RF power control and benefits of IF double filters.
Description of the premix unit and frequency configuration.
Description of the PLL assembly unit.
Description of the memory assembly unit.
Details on microprocessor operations and VCO unit description.
Circuit diagram for the RF unit.
Circuit diagram for the coilpack unit.
Circuit diagram for the IF unit.
Circuit diagram for the AF VOX unit.
Circuit diagram for the LPF unit.
Circuit diagram for the premix unit.
Circuit diagram for the 10W final unit.
Circuit diagram for the VFO unit.
Procedures for power supply adjustments.
Adjustment procedures for receiver functions.
Procedure for adjusting VCO voltage.
Procedure for adjusting the standard oscillator frequency.
Coil adjustment for antenna and mixer circuits.
Procedure for adjusting the IFT coils.
Procedure for base current adjustment.
Procedure for RF detector adjustment.
Procedure for setting the ALC meter's starting point.
Procedure for ALC meter adjustment.
Procedure for RF meter adjustment.
Procedure for protection circuit adjustment.
Procedure for carrier suppression adjustment.
Procedure for carrier point adjustment.
Procedure for FSK adjustment.
Procedure for side tone adjustment.
Procedures for premix adjustments.
Procedures for PLL adjustments.
Procedures for memory adjustments.
Adjustment procedure for scan speed.
Procedures for power meter adjustment.
Procedures for REF power calibration.
To Next Page
