6.9 Underfloor weighing
Objects unsuitable for placing on the weighing scale due to size or shape may be
weighed with the help of the flush-mounted platform.
Proceed as follows:
• Switch off balance.
• Turn round the balance.
• Open the closing lid (1) on the bottom of your balance.
• Screw-in the hook for underfloor weighing (2) carefully and completely till to
the stop (do not screw-in farther, as this will damage the balance).
• Place your balance over an opening.
• Suspend the goods to be weighed from the hook and carry out the weighing.
1
Fig. 1: Setup of balance for underfloor weighing
CAUTION
• For underfloor weighing use the original hook provided by KERN.
• Always ensure that all suspended objects are stable enough to hold the desired
goods to be weighed safely (danger of breaking).
• Never suspend loads that exceed the stated maximum load (max) (danger of
breaking)
Always ensure that there are no persons, animals or objects that might be damaged
underneath the load.
!
NOTICE
After completing the underfloor weighing the opening on the bottom of the balance
must always be closed (dust protection).
To Next Page
Loading...
Need help?
General
