Need help?Do you have a question about the KERN EW 4200-2NM and is the answer not in the manual?
General| Category | Scales |
|---|---|
| Model | EW 4200-2NM |
| Capacity | 4200 g |
| Readability | 0.01 g |
| Display | LCD |
| Weighing plate material | Stainless steel |
| Calibration | External calibration |
| Interface | RS-232 |
| Power supply | 230 V / 50 Hz |
| Reproducibility | 0.01 g |
Specifies the approved purpose and application for the balance.
Outlines actions that should not be performed to prevent damage or incorrect results.
Advises careful reading of operating instructions before balance erection and commissioning.
States that only trained personnel should operate and maintain the balance.
Guidance on selecting an optimal location for the balance to ensure accurate weighing.
Instructions for carefully removing the balance from its packaging.
Steps for leveling the balance using its adjustable feet for stability.
Steps and considerations for the initial power-on and warm-up period.
Procedure to calibrate the balance to local gravity for accurate measurements.
Details various methods for adjusting the balance's accuracy.
Guide for adjusting the balance using external weights for EW and EWB models.
Information on the necessity and process of balance verification for legal trade.
Step-by-step guides for standard weighing and tare weighing operations.
Common problems and their solutions for the balance.
To Next Page
