Need help?Do you have a question about the KERN EW 620-3NM and is the answer not in the manual?
General| Category | Scales |
|---|---|
| Capacity | 620 g |
| Readability | 0.001 g |
| Linearity | 0.003 g |
| Minimum part weight at piece counting | 0.01 g |
| Interface | RS-232 |
| Calibration | External calibration |
| Type | Precision balance |
| Reproducibility | 0.001 g |
| Weighing units | g, ct, oz |
| Housing material | Plastic |
| Power supply | AC adapter |
| Warm-up time | 2 hours |
| Operating temperature | 10 °C - 30 °C |
Defines the primary purpose and application of the balance for weighing.
Lists actions and conditions that should be avoided to prevent damage or incorrect results.
Emphasizes the importance of reading and following all operating instructions before use.
States that only trained personnel are permitted to operate and maintain the device.
Guides on selecting an appropriate location for the balance to ensure reliable results.
Explains how to connect the balance to the mains power supply using the provided adaptor.
Explains the necessity and procedure for adjusting the balance to local gravity.
Details methods for adjusting the balance using internal or external weights.
Outlines the legal requirements and procedures for balance verification.
Explains the function of the verification switch and the importance of official seals for verified balances.
To Next Page
