Need help?Do you have a question about the KERN EW Series and is the answer not in the manual?
Cursor on LCD bottom right indicates zero-point.
Cursor on LCD bottom edge indicates tare weight deducted.
LCD shows low battery status, prompting battery replacement.
Flashing cursor indicates current weighing mode (kg or lb).
Powers off the scale.
Powers on the scale and selects weighing mode (kg or lb).
Zeros weight lighter than division; shows ZERO cursor.
Handles tare weight deduction and toggles gross/net weight display.
Cursor on LCD bottom right indicates zero-point.
Cursor on LCD bottom edge indicates tare weight deducted.
LCD shows low battery status, prompting battery replacement.
Flashing cursor indicates current weighing mode (kg or lb).
Powers off the scale.
Powers on the scale and selects weighing mode (kg or lb).
Zeros weight lighter than division; shows ZERO cursor.
Handles tare weight deduction and toggles gross/net weight display.
General| Weighing plate material | stainless steel |
|---|---|
| Power supply/adapter included | yes |
| Calibration | External calibration |
| Display | LCD with backlight |
| Operating temperature | 10°C - 40°C |
| Weighing units | g, kg, lb, oz |
| Interface | RS-232 |
To Next Page
