Need help?Do you have a question about the KERN EW 6000-1M and is the answer not in the manual?
Explains how to block the adjusting function for verification purposes.
Details the procedure for adjusting the balance using calibration weights.
Specifies the recommended warm-up period for optimal weighing results.
Explains the power status indicator and its meaning.
Describes how the balance indicates a zero reading and the relevant symbol.
Details the procedure for taring the balance before weighing.
Explains how to block the adjusting function for verification purposes.
Details the procedure for adjusting the balance using calibration weights.
Specifies the recommended warm-up period for optimal weighing results.
Explains the power status indicator and its meaning.
Describes how the balance indicates a zero reading and the relevant symbol.
Details the procedure for taring the balance before weighing.
General| Capacity | 6000 g |
|---|---|
| Readability | 0.1 g |
| Minimum Load | 0.5 g |
| Weighing Plate Material | Stainless Steel |
| Power Supply/Adapter Included | Yes |
| Protection Class | IP 20 |
| Power Supply | AC Adapter |
| Operating Temperature | 10 °C to 40 °C |
| Reproducibility | ±0.1 g |
| Stabilisation Time | ≤ 2 seconds |
To Next Page
