Need help?Do you have a question about the KERN EW 6200-2NM and is the answer not in the manual?
General| Model | EW 6200-2NM |
|---|---|
| Type | Precision Balance |
| Capacity | 6200 g |
| Readability | 0.01 g |
| Reproducibility | 0.01 g |
| Minimum part weight at piece counting | 0.1 g |
| Display | LCD, backlit |
| Operating temperature | 10°C - 40°C |
| Material | Plastic |
Details specific readout capabilities and maximum weighing capacities for different models.
Covers class of accuracy, reproducibility, and linearity for precise measurements.
Emphasizes reading instructions and ensuring staff are properly trained for safe operation.
Outlines methods for adjusting the balance using internal or external weights for accuracy.
Explains the verification process, switch usage, and the importance of official seals for compliance.
Explains how to switch on the balance and perform a standard weighing operation.
Details how to use the tare function to zero the balance with a container for net weight measurement.
Guides on setting up and performing piece counting using reference units.
Details how to set up and perform percent weighing relative to a reference weight.
Addresses common issues like display problems, incorrect readings, and provides possible causes and solutions.
To Next Page
