KERN ALJ - Introducing the Reference Weight in the Numerical Value

TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2112 85
12.5.2 Introducing the reference weight in the numerical value
 Using the navigation buttons

, select the menu item <Percent weigh.>.
 Confirm by pressing the PRINT button, the currently set mode will be displayed.
 Using the navigation buttons

, select the “Manual” setting.
 Confirm, pressing PRINT.
 Using the navigation buttons (see chapter 3.2.2), enter the reference weight
(100%) in grams.
 Confirm the entry, pressing the PRINT button.
From now on, the scale is in the percentage value determination mode.
 Place the weighed material. The result will be displayed.
W% Percentage sample weight
W: Sample weight in grams
REF: Reference weight (100%)
Once the optional printer is connected, the displayed value can be printed.
Sample printout (KERN YKB-01N):
07-09-20 11:14:57
Proz.
49.95%
Percentage sample weight
Weight:
9.990 g
Sample weight in grams
Refer. :
20.000 g
Reference weight (100%)
Return to the weighing mode
 Press the ON/OFF button.