42 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011
9 Basic mode
9.1 Switching the scale on and off
Switching on:
In the stand-by mode, press the ON/OFF button.
The scale is ready to weigh immediately after the
weight symbol is displayed.
Press the ON/OFF button. The scale will be switched
to the stand-by mode (energy saving function). The
scale is in the stand-by node.
To switch the scale off entirely, disconnect the power
supply.
9.2 Resetting
Remove the load from the scale.
Press the TARE button. The zero indicator and [-0-]. symbol will be displayed.
To Next Page
Loading...
Need help?
General
