80 TALJG_A/TALSG_A/TPLJG_A/TPLSG_A-BA-e-2011
After the preset value is reached, press the PRINT button. The following will be
displayed for a while: “Wait” and then “Tare”. Next, the display will change to
“G=0” and it will show a symbol enabling to weigh the second ingredient.
The preset value is “40.000 g” now. Start weighing. After the preset value is
reached, “OK” will be displayed beside the weighing range indicator.
After the last ingredient is weighed and confirmed, the total weight (TOT:) of all
ingredients will be displayed and printed automatically.
Return to the formulation mode, pressing the ON/OFF button and start the next
formulation.
Return to the weighing mode, pressing the ON/OFF button again.
To Next Page
Loading...
