EasyManuals Logo
Home>KERN>Scales>EMS 300-3

KERN EMS 300-3 User Manual

KERN EMS 300-3
31 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10 EMS-BA-e-1716
If the batteries are run down, "LO" appears in the display. Press ON/OFF-key and
replace the batteries immediately.
If the balance is not used for a longer time, take out the batteries and store them
separately. Leaking battery liquid could damage the balance.
If there exists an optional rechargeable battery, it has to be connected in the battery
compartment via a separate plug-in socket. Now the mains adapter delivered with the
rechargeable battery must be applied.
5.5 Initial Commissioning
In order to obtain exact results with the electronic balances, your balance must have
reached the operating temperature (see warming up time chap. 1). During this
warming up time the balance must be connected to the power supply (mains,
accumulator or battery).
The accuracy of the balance depends on the local acceleration of gravity.
Strictly observe hints in chapter Adjustment.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KERN EMS 300-3 and is the answer not in the manual?

KERN EMS 300-3 Specifications

General IconGeneral
BrandKERN
ModelEMS 300-3
CategoryScales
LanguageEnglish

Related product manuals