Need help?Do you have a question about the KERN EMB 200-2 and is the answer not in the manual?
Defines the primary purpose and application of the balance.
Lists prohibited uses that can cause damage or incorrect results.
Outlines conditions that void the product guarantee.
Explains requirements for periodic checks of balance and test weights.
Emphasizes reading instructions carefully before use, even for experienced users.
States that only trained personnel should operate and maintain the device.
Guide for checking packaging and device for damage upon delivery.
Instructions for proper packaging for returns to prevent damage.
Advises on selecting a suitable location for accurate weighing.
Steps for carefully removing the balance from its packaging.
Guidance on correctly positioning the weighing plate horizontally.
Lists the standard accessories included with the balance.
Instructions for installing and using batteries for power.
Guidelines for connecting the balance to the mains power supply.
Notes on the warm-up time required for stable measurements.
Procedure for calibrating the balance to local gravity for accuracy.
Instructions for weighing items too large for the weighing plate.
Describes the function of each key on the balance's interface.
Step-by-step guide for performing a standard weighing operation.
Instructions on how to zero the balance with a container.
How to change the displayed weighing units (e.g., grams, ounces).
Explains the Auto-Zero function and how to manage small weight changes.
Details on activating/deactivating the automatic power-off feature.
Procedure to restore the balance to its factory default settings.
Instructions for safely cleaning the balance.
Information on authorized service for internal maintenance.
Guidance on proper disposal of the device and packaging.
Identifies causes and solutions for a blank display.
Addresses issues like draughts or vibrations affecting readings.
Solutions for inaccurate measurements due to zeroing or environmental factors.
To Next Page
General
