Need help?Do you have a question about the KERN EG 420-3NM and is the answer not in the manual?
General| Maximum Capacity | 420 g |
|---|---|
| Power Supply | AC adapter or 6x AA batteries |
| Weighing plate material | stainless steel |
| Readability | 0.001 g |
| Calibration | External |
| Display | LCD |
| Category | Precision scale |
| Interface | RS-232 |
| Units | g |
| Reproducibility | ±0.001 g |
Defines intended use, inappropriate actions, guarantee, and fundamental safety rules.
Provides guidelines for handling the balance during transport, storage, and initial acceptance checks.
Details optimal location and environmental factors for achieving accurate weighing results.
Covers unpacking, accessories, power supply connection, and initial power-on sequence.
Explains procedures for adjusting the balance using internal or external weights.
Details the step-by-step process for calibrating the balance using the adjustment knob.
Identifies and explains the purpose of the balance's buttons, display, and other controls.
Details standard weighing, underfloor weighing, and tare operations for accurate measurements.
Covers piece counting, percent weighing, and weighing with tolerance ranges.
Explains the RS232C interface, data transmission formats, and output commands.
Lists common problems and their potential causes and solutions for the balance.
To Next Page
