Need help?Do you have a question about the KERN EWJ and is the answer not in the manual?
General| Weighing plate material | stainless steel |
|---|---|
| Interface | RS-232 |
| Readability | 0.1 g |
| Calibration | External |
| Weighing units | g, kg, lb, oz |
| Display | LCD |
| Reproducibility | 0.01 g - 0.1 g |
Lists physical parts of the balance with their location numbers.
Describes the main operational parts of the balance and their functions.
Explains the intended and correct usage of the balance for weighing.
Lists incorrect usage scenarios that can lead to damage or malfunction.
Outlines conditions under which warranty claims become void.
Explains the need for regular checks of balance properties and testing weights.
Emphasizes reading the manual and using trained staff for operation and maintenance.
Instructions for checking upon receipt and guidelines for packaging for return transport.
Provides criteria for selecting an optimal location for accurate weighing results.
Steps to remove the balance from packaging and verify its contents and condition.
Instructions for physically assembling, installing, and ensuring the balance is level.
Details on how to properly connect the balance to the power supply.
Information regarding the use and charging of an optional rechargeable battery.
Specific instructions for charging the rechargeable battery pack.
Guidance on connecting external devices like printers or PCs to the balance.
Steps to perform for the initial setup and operation of the balance.
Explains the importance and process of adjusting the balance for accurate measurements.
Detailed steps for performing an internal automatic adjustment of the balance.
Instructions for external adjustment using pre-defined weights.
Steps for performing an external adjustment with a user-specified weight.
Procedure to adjust for the gravitational constant based on location.
Procedure to set the gravitational constant's place of location.
Instructions for switching the balance on and off.
Step-by-step guide for performing a basic weighing operation.
How to reset the balance to zero before weighing.
Procedure for taring the balance to exclude the weight of a container.
How to change and enable different weighing units on the balance.
Details on using the primary weighing application.
Information on utilizing the piece counting application.
Guide to using the checkweighing application for tolerance checks.
Explains how to navigate through the balance's menu system.
Describes how to access and use application-specific menus.
Overview of the setup menu for global balance configurations.
Detailed breakdown of options available within the setup menu.
Technical details and usage of the RS-232C serial interface.
Information on connecting the balance via USB to a PC.
Step-by-step instructions for connecting the balance to a PC via USB.
Details on using the optional Bluetooth connectivity.
Steps to add a Bluetooth device for connection to the balance.
How to find the COM port number assigned to the Bluetooth connection.
Explanation of the KCP for controlling the balance via external systems.
How to use the add-up mode to sum multiple weighing values.
Procedure for manual data output via the PRINT button.
How to configure automatic data output based on weighing conditions.
Setting up continuous data output at defined intervals.
Instructions for cleaning the balance safely and effectively.
Guidelines for servicing and maintenance, requiring authorized personnel.
Information on proper disposal of the balance and packaging.
Lists common faults and their potential causes for troubleshooting.
To Next Page
