Need help?Do you have a question about the KERN EWJ 6000-1M and is the answer not in the manual?
Explains the function of each button on the balance keypad.
Explains how to use buttons for numerical data entry.
Emphasizes reading the operation manual before setup and commissioning.
States that only trained staff should operate and maintain the appliance.
Explains why and when to adjust the balance for accuracy.
Step-by-step guide for performing internal automatic adjustment.
Procedure for external adjustment using selectable standard weights.
Procedure for external adjustment using a user-defined adjustment weight.
How to adjust the balance for the local gravitational constant.
How to set the gravitational constant based on the location of use.
Steps for performing a basic weighing operation.
Steps for performing piece counting using a reference quantity.
How to weigh goods within set tolerance limits for a target quantity.
How to weigh goods within set tolerance limits for a target weight.
Troubleshooting steps for when the display remains dark.
Troubleshooting steps for fluctuating weight readings.
Troubleshooting steps for inaccurate weighing results.
Indicates the zero setting range has been exceeded.
Indicates the zero setting range was not achieved.
Indicates an unstable load condition.
Indicates an error occurred during balance adjustment.
Indicates the load is below the minimum threshold.
Indicates low battery or rechargeable battery capacity is exhausted.
To Next Page
General
