Need help?Do you have a question about the KERN EWJ 600-2M and is the answer not in the manual?
General| Readability | 0.01 g |
|---|---|
| Weighing range [Max] | 600 g |
| Reproducibility | 0.01 g |
| Minimum part weight at piece counting | 0.1 g |
| Power supply | AC adapter 100-240V, 50/60Hz |
| Capacity | 600 g |
| Material | Stainless steel |
| Protection Class | IP 54 |
| Warm-up time | 2 hours |
| Operating temperature | 10 °C - 40 °C |
General safety instructions for operating and maintaining the balance.
Step-by-step guide for performing the balance's internal calibration.
Method for calibrating the balance using external adjustment weights.
Calibrating the balance using a user-specified adjustment weight value.
Setting the balance based on local gravitational constant for accuracy.
Instructions for turning the balance on/off and performing basic weighing.
Procedures for zeroing the balance and using the taring function for net weight.
Solutions for common issues like display problems or incorrect results.
List and explanation of error messages displayed by the balance.
To Next Page
