KERN EWJ User Manual

TEWJ-B-BA-e-2310 65
15.1.3 Connect printer
 Turn off scale and printer.
 Use a suitable cable to connect the weighing balance to the interface of the
printer.
Faultless operation requires an adequate KERN interface cable (optional).
 Turn on scale and printer.
Communication parameters (baud rate, bits and parity) of balance and
printer must match; see menu item < com  Rs232. >. (chap. 14.3.1)
15.2 USB connection
The scale is equipped as standard with a USB interface for connecting a peripheral
device (e.g. computer).
Note:
This interface is not suitable for connecting a printer.
15.2.1 Connect PC
Switch off the scale and connect it to the PC
as shown in the illustration.
Switch on the scale.
The USB driver is installed automatically.
If necessary, a suitable driver can be down-
loaded from our KERN homepage
www.kern-sohn.com/Downloads. Select
the driver version suitable for your system
and execute the exe file.
To transfer the data into a PC programme
we recommend our transfer software "Bal-
ance Connection KERN SCD 4.0".
Printout examples:
Net weight:
S S
17.2 g
Tare weight:
543.8 g
Gross weight:
561.0 g

KERN EWJ Specifications

General

Weighing plate material	stainless steel
Interface	RS-232
Readability	0.1 g
Calibration	External
Weighing units	g, kg, lb, oz
Display	LCD
Reproducibility	0.01 g - 0.1 g