KERN EWJ - Using the Application; Target Weighing

50 TEWJ-B-BA-e-2310
13.2 Using the application
13.2.1 Target weighing
The <target weighing> application variant allows weighing of goods within set tolerance
limits in keeping with a determined target weight.
Reaching the target weight is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance marks).
Optic signal:
The tolerance marks provide the following information:
Upper limit
Target weight
Lower limit
Acoustic signal:
The acoustic signal depends on the menu setting
< setup  beeper >, see chap. 14.3.1.