KERN EWJ - 4 Basic Information (General); 4.1 Proper Use; 4.2 Improper Use; 4.3 Warranty

TEWJ-B-BA-e-2310 3
7.8.2 External adjustment < CalExt > ................................................................21
7.8.3 External adjustment with user-defined adjustment weight < caleud > .......22
7.8.4 Gravitational constant adjustment location < graadj > ..............................24
7.8.5 Gravitational constant place of location < grause > ...................................25
8 Verification ....................................................................................................... 26
9 Basic Operation ............................................................................................... 28
9.1 Turn on/off ................................................................................................... 28
9.2 Simple weighing .......................................................................................... 28
9.3 Zeroing ........................................................................................................ 29
9.4 Taring .......................................................................................................... 29
9.5 Switch-over weighing unit ............................................................................ 30
10 Operating concept ........................................................................................ 32
11 Application <Weighing> ............................................................................... 34
11.1 Application-specific settings ..................................................................... 34
11.2 PRE-Tare ................................................................................................. 36
11.2.1 Take over the placed weight as PRE-TARE value ...........................................36
11.2.2 Enter the known tare weight numerically .........................................................37
11.3 Data-Hold function ................................................................................... 38
11.4 Weighing Units ......................................................................................... 38
11.4.1 Setting weighing unit .......................................................................................38
11.4.2 Weighing with multiplication factor via the application unit <FFA> ...................39
11.4.3 Percent weighing by application unit <%> .......................................................40
11.4.4 Molar weighing mode ......................................................................................41
12 Application <Counting> ............................................................................... 42
12.1 Application-specific settings ..................................................................... 42
12.2 Using the application ................................................................................ 43
12.2.1 Piece counting.................................................................................................43
12.2.2 Target counting ...............................................................................................46
13 Application < Checkweighing > ................................................................... 49
13.1 Application-specific settings ..................................................................... 49
13.2 Using the application ................................................................................ 50
13.2.1 Target weighing ...............................................................................................50
13.2.2 Checkweighing ................................................................................................53
14 Menü .............................................................................................................. 55
14.1 Navigation in the menu............................................................................. 55
14.2 Application menu ...................................................................................... 55
14.3 Setup menu .............................................................................................. 56