KERN FFN-N - Adjusting Non-Verifiable Models

19 FFN-N-BA-e-1323
7.1.1 Adjusting non-verifiable models
Display
Operation
 Start balance by pressing
 Whilst the weighing scale is carrying out a self-test,
(00…- 99…) press and hold until the message “F1
CAL“ appears.
 Press ,
in the display appears „UnLod“.
(Example)
 Press again
the weight value will be displayed.
 Enter value for adjustment weight (See chpt 1) by
 Position weight
 Press
Remove weight whilst scale is carrying out self-test
Weighing scale changes to zero display.
This completes the adjustment process.