To Next PageTo Next Page
Need help?Do you have a question about the KERN FOB Series and is the answer not in the manual?
General| Weighing plate material | stainless steel |
|---|---|
| Calibration | External calibration |
| Operating temperature | 40°C |
| Interface | RS-232 |
| Material | Plastic |
Technical specifications for KERN FOB-S and FOB-NS models.
Technical specifications for KERN FOB 0.5K-4NS and FOB 5K-3NS models.
Technical specifications for KERN FOB-NL models.
Technical specifications for KERN FOB 10K-3NL and FOB 30K-3NL models.
Technical specifications for KERN FOB-LM models.
Technical specifications for KERN FOB 6K-3LM and FOB 10K-3LM models.
Technical specifications for KERN FOB 1.5K0.5, FOB 3K1, and FOB 6K2 models.
Identifies key components of FOB-S, FOB-NS, and FOB-NL scales.
Identifies key components of FOB-LM and FOB scales.
Provides descriptions for numbered components shown in diagrams.
Details keyboard layouts and button functions across different models.
Explains display icons and their meaning for various FOB models.
Describes correct usage and warns against misuse of the balance.
Outlines conditions that void warranty claims.
Guidelines for checking measuring properties and test weights.
Emphasizes reading the manual and using trained personnel.
Instructions for acceptance testing, packaging, and return transport.
Guidelines for choosing an appropriate location for accurate weighing.
Steps for removing the balance from packaging and initial placement.
Procedures for leveling the balance and connecting to power.
Instructions for hood assembly and battery installation.
Procedures for initial setup and calibrating the balance.
Detailed steps for adjusting FOB-S models via the balance display.
Detailed steps for adjusting FOB-NS models via the balance display.
Detailed steps for adjusting FOB-NL and FOB models via the balance display.
Steps to prepare FOB-LM for calibration, including password entry.
Detailed steps for performing calibration on FOB-LM models.
Explains when official verification is mandated by EU directive.
Information on type approval, re-verification, and seal importance.
Step-by-step guide for basic weighing operations.
How to zero out container weight for net weight measurement.
Instructions for changing the unit of measurement on the balance.
How to freeze the displayed weight for unstable samples.
How to control the display's backlight.
Setting and using upper/lower limits for weighing and sorting.
Detailed steps for configuring lower and upper tolerance values.
Interpreting signals indicating weight relative to tolerance limits.
Procedures for accessing and moving through the balance's menu.
How to return from the menu to the weighing mode.
Diagram of menu structure and options for FOB-S and FOB-NS models.
Menu structure for FOB-NL and verified FOB-LM models.
Menu structure for non-verified FOB-LM models.
Diagram of menu structure and options for FOB models.
How to configure the desired unit of measurement for weighing.
Configuring the automatic standby switch-off time for power saving.
Lists common error messages and their corresponding causes and solutions.
Guidelines for safely cleaning the balance components.
Information on authorized servicing and maintenance.
Procedures for environmentally responsible disposal of the appliance.
Provides potential causes and solutions for common operational problems.
