32 FOB-BA-e-1821
9.2 Taring
The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighing procedures show the net weight of the goods to be
weighed.
Balance display Operation
(example)
• Deposit weighing container.
The weight of the container is displayed.
Press the TARE button, the zero display
disappears.
The weight of the container is now internally saved.
(Example FOB-NS)
(Example FOB-NL)
Place weighed items in the weighing container.
The net weight of the weighed items is displayed.
For L models, a triangle appears below the NET
symbol.
9.3 Switch-over weighing unit
According to the requirements the balance can be switched over into different units.
These are set in the menu.
In the weighing mode, press the UNIT key to toggle to the selected weighing units.
The available weighing units depend on the model and verification of the
balance, see chap.1 "Technical data".
When switching-
on the balance, the unit in which the balance has been
switched off, will be displayed.
To Next Page
Loading...
Need help?
General
