Need help?Do you have a question about the KERN FKB 6K0.02 and is the answer not in the manual?
Identifies and lists the main physical parts of the weighing scale.
Details the function of each button on the scale's keyboard.
Explains how to input numerical values using the scale's keys.
Describes the meaning of various symbols and indicators on the scale's display.
Outlines the intended and correct usage of the weighing balance.
Lists prohibited uses and potential damages to the balance.
Details conditions under which warranty claims become void.
Emphasizes regular checks of balance properties and testing weights for quality assurance.
Stresses the importance of reading the manual before setup and operation.
States that only trained staff should operate and maintain the appliance.
Instructs on checking packaging and appliance for damage upon receipt.
Provides guidelines for retaining original packaging and proper return procedures.
Details environmental and site requirements for accurate weighing results.
Guides the user through removing the device from packaging and checking for completeness and damage.
Details the procedure for charging the optional rechargeable battery pack.
Step-by-step guide for performing external calibration using a standard weight.
Instructions for calibrating the balance with a user-specified adjustment weight.
Describes how to adjust the balance for the local gravitational constant.
Explains how to set the balance for a specific gravitational constant installation site.
Instructions for powering the weighing balance on and off.
Guides through the basic process of performing a simple weighing.
Explains how to choose between different operational modes like weighing or counting.
Outlines how to access and configure settings specific to the weighing application.
Describes how to use the weight of a container as a tare value.
Explains how to manually input a tare weight value.
Details how to freeze the displayed weight value.
Explains how to perform weighing and display results as a percentage of a reference weight.
Describes how to apply a multiplication factor to the weighing result.
Explains how to enable, switch over, and disable units for quick selection.
Describes how to set application-specific units like %, Pcs, FFA.
Outlines how to access settings for the counting application.
Details the process of setting a reference quantity for piece counting.
Explains how to set target quantities and tolerances for check counting.
Outlines how to access settings for the checkweighing application.
Describes how to define limit values for the checkweighing function.
Explains how to navigate through the balance's menu system.
Describes how the application menu provides access to specific functions.
Provides an overview of the various settings available in the setup menu.
Introduces the KCP protocol for communication with external devices.
Explains how to use the add-up mode to sum individual weighing values.
Details how to manually output data by pressing the PRINT button.
Describes how data is automatically output when certain conditions are met.
Explains how to set up continuous data output at defined intervals.
Provides instructions for cleaning the weighing balance.
States that only authorized technicians should perform servicing.
Advises on proper disposal procedures for the appliance and packaging.
To Next Page
General
