To Next PageTo Next Page
Need help?Do you have a question about the KERN KB 10000-1 and is the answer not in the manual?
Technical specifications for KERN 572 series balances, including readability, weighing range, and dimensions.
Technical specifications for KERN 573 series balances, covering accuracy class, weighing capacity, and operating conditions.
Technical specifications for KERN KB series balances, detailing readability, weighing range, and plate sizes.
Technical specifications for KERN FKB series balances, including weighing capacity, linearity, and temperature range.
Technical specifications for KERN DS series balances, listing readability, maximum weighing range, and weight.
Technical specifications for KERN PCB series balances, covering weighing range, reproducibility, and interface.
Technical specifications for KERN FCB series balances, detailing weighing range, linearity, and net weight.
Defines the proper and intended application of the balance as a non-automatic weighing instrument.
Lists prohibited uses and potential consequences for the balance, such as dynamic weighing.
Outlines conditions under which the product guarantee is invalidated.
Explains the importance of regular checks and calibration of the balance and weights.
Emphasizes reading and following the manual before erecting and commissioning the balance.
States that only trained personnel should operate and look after the device.
Procedure for inspecting the device upon delivery for any visible signs of external damage.
Guidelines for retaining original packaging for returns and safe transport security.
Instructions for selecting a suitable, stable, and level location for the balance.
Covers unpacking, power connection, peripheral setup, and initial calibration steps.
Details on adjusting for verification and the official verification process requirements.
Overview of the balance's display symbols and keyboard functions.
Explains core weighing functions like Tare, Count, Percent, Formula, and Tolerance.
Covers adjustment, preselect tare, auto tare, filter/speed, auto off, variable factor, and preselect unit.
Details RS 232 C interface, data output methods, and baud rate settings.
Covers printer connection and underfloor weighing procedures.
Instructions for safely cleaning the balance using mild agents.
Guidelines for upkeep and service, to be performed by authorized personnel.
Procedures for environmentally sound disposal of the device according to local laws.
General
