To Next PageTo Next Page
Need help?Do you have a question about the KERN KDP 3000-2 and is the answer not in the manual?
General| Maximum Capacity | 3000 g |
|---|---|
| Readability | 0.01 g |
| Calibration | External |
| Power Supply | AC adapter or 4 x AA batteries |
| Category | Precision balance |
| Readability [d] | 0.01 g |
| Weighing range [Max] | 3000 g |
| Repeatability | 0.01 g |
| Linearity | ± 0.03 g |
| Minimum part weight at piece counting | 0.1 g |
| Stabilisation time under laboratory conditions | 2 s |
| Weighing plate material | Stainless steel |
| Capacity | 3000 g |
| Material | Stainless steel |
| Permissible ambient temperature | 5°C to 35°C |
Product name and model series for the operating and installation instructions.
Details on prohibited uses, potential damage, and safety risks like explosion hazards.
Emphasizes reading the manual before setup and commissioning for safe operation.
States that only trained personnel should operate and maintain the appliance.
Standardized set of interface commands for KERN balances to control parameters and functions.
Explains how to initiate adjustment using KCP commands and provides a step-by-step procedure.
