KDP-BA_IA-e-1710 8
7 Unpacking and placing
7.1 Installation Site, Location of Use
The digital weighing platforms are designed in a way that reliable weighing results
are achieved in common conditions of use.
Precise and fast work is achieved by selecting the right place for your digital weighing
platform and your weighing plate.
On the installation site observe the following:
• Place the weighing platform on a firm, level surface;
• Avoid extreme heat as well as temperature fluctuation caused by installing
next to a radiator or in the direct sunlight;
• Protect the digital weighing platform from direct draughts from open windows
and doors;
• Avoid jarring during weighing;
• Protect the digital weighing platform from high air humidity, fumes and dust;
• Do not expose the digital weighing platform to strong humidity for extended
periods. Non-permitted condensation (condensation of air humidity on the
appliance) may occur if a cold appliance is taken to a considerably warmer
environment. In this case, acclimatize the disconnected appliance for ca. 2
hours at room temperature.
• Avoid static charge of goods to be weighed or weighing container.
Major display deviations (incorrect weighing results) may be experienced should
electromagnetic fields (e.g. due to mobile phones or radio equipment), static
electricity accumulations or instable power supply occur. Change location or remove
source of interference.
7.2 Unpacking and checking
Take the digital weighing platform out of the packaging, remove the packaging
material and install at the designated workstation. Check if that there has been no
damage and that all packing items are present.
Scope of delivery / serial accessories:
To Next Page
Loading...
Need help?
General
