Kernau KBH 07551 X3 - Lightbulb Replacement Procedure; Mechanical Controls and Operation; Turbine Speed Adjustment; Lighting Activation

EN
23
REPLACEMENT OF LIGHTENING
Beforeundertakinganyoperationsrelatedtothereplacementoflightbulbs,
thehoodshouldbedisconnectedfromthepowersupplynetwork.Ifthehood
wascorectlydisconnectedfromthepowersupply,pleasewiatafewminutes,
andafterthecoolingthelightbulb,itcanbereplaced.
CAUTION:
Donottouchlightbulbaslongastheyarehot.Becarefulnottotouch
directlythehalogenbulbwithbarehands.
REPLACEMENT ALUMINIUM FILTER - Fig. S1
REPLACEMENT OF LIGHTENING - Fig. S2
INSTALLATION OF THE KITCHEN HOOD - Fig. S3
DIMENSIONS OF THE KITCHEN HOOD - Fig. S4
REPLACEMENT CARBON FILTERS - Fig. S5
MECHANICAL CONTROL
Turbine operation control:
• „0”–turnsofftheturbine
• „1”–turbineoperationatminimumspeed
• „2”–turbineoperationataveragespeed
• „3”–turbineoperationatmaximumspeed
Turbineisstartedbypressingtheselectedbuton.Highergearmeansgrates
airflow.
Lighting:
• „Bulb symbol”–pressingthebuttonturnsonthelighting.Pressingthe
buttonasecondtimeturnsoffthelighting.