EN
60
CHAPTER 6. TRANSPORTATION AND CHANGING
OFINSTALLATION POSITION
Defrosting
Your refrigerator performs automatic defrosting. The water
formed as a result of defrosting passes through the water
collection spout, flows into the vaporisation container behind
your refrigerator and evaporates there.
• Make sure you have disconnected the plug of yourrefrigerator before cleaning the
vaporisation container.
• Remove the vaporisation container from its position byremoving the screws as
indicated. Clean it with soapywater at specific time intervals. This will prevent
odoursfrom forming.
Transportation and changing of installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a
strong rope. The instructions written on the corrugated box must be followed while
transporting.
• Before transporting or changing the
installation position, all the moving objects
(ie,shelves,crisper…) should be taken out
or fixed with bands in order to prevent them
from getting damaged.
Carry your fridge in the upright position.
Zbiornik
skraplacza
Uchwyty do
przenoszenia
Uchwyty do
noszenprze ia
Podczas transportu należy uważać
na szklaną powierzchnię
Evaporating
tray
Pay attention to glass surface
when transporting
Transportation
handles
Transportation
handles
To Next Page
Loading...
Need help?
General
