EN
37
General warnings
WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING: Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
WARNING: Do not use electrical appliances inside the food storage compartments of
the appliance, unless they are of the type recommended by the manufacturer.
WARNING: Do not damage the refrigerant circuit.
WARNING: When positioning the appliance, ensure the supply cord is not trapped or
damaged.
WARNING: Do not locate multiple portable socket-outlets or portable power supplies
at the rear of the appliance.
WARNING: In order to avoid any hazards resulting from the instability of the appliance,
it must be fixed in accordance with the following instructions:
If your appliance uses R600a as a refrigerant (this information will be provided
on the label of the cooler) you should take care during transportation and installation to
prevent the cooler elements from being damaged. R600a is an environmentally friendly
and natural gas, but it is explosive. In the event of a leak due to damage of the cooler
elements, move your fridge away from open flames or heat sources and ventilate the
room where the appliance is located for a few minutes.
• While carrying and positioning the fridge, do not damage the cooler gas circuit.
• Do not store explosive substances such as aerosol cans with a flammable propellant
in this appliance.
• This appliance is intended to be used in household and domestic applications such
as:
- staff kitchen areas in shops, offices and other working environments.
- farm houses and by clients in hotels, motels and other residential type environments.
- bed and breakfast type environments;
- catering and similar non-retail applications.
• If the socket does not match the refrigerator plug, it must be replaced by the
manufacturer, a service agent or similarly qualified persons in order to avoid a
hazard.
CHAPTER 1. BEFORE USING THE APPLIANCE