Kernel KN-5000C - Page 103

94
System can help prevent electromagnetic interference by maintaining a minimum
distance between portable and mobile RF communications equipment (transmitters)
and 308nm Excimer System as recommended below, according to the maximum
output power of the communications equipment
Rated
maximum
output of
transmitter
(W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
P
V
d ]
5.3
[
1
=
80 MHz to 800 MHz
P
E
d ]
5.3
[
1
=
800 MHz to 2.5 GHz
P
E
d ]
7
[
1
=
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above the recommended
separation distance d in metres (m) can be estimated using the equation applies to the
frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.