23
3.4 Connection
3.4.1 Connecting AC Power
⚫ Please confirm that the three-core power wire used is in accordance
with the factory configuration.
⚫ Insert one end of the power wire into the AC outlet on the rear panel
of the equipment.
⚫ Insert the other end into the hospital-specific three-core AC outlet,
and ensure that the power requirements of section 3.3 are met.
Warning!
⚫ The ground lead in the three-core socket must be well
grounded.
⚫ Do not use the adapter that converts the three-core to
two-core.
⚫ Do not use a socket that is controlled by a wall switch, to avoid
powering off accidentally.
To Next Page
Loading...
