EasyManua.ls Logo

Kernel KN-5000C - Cleaning and Disinfection

Kernel KN-5000C
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66
When the service life of the equipment and accessories expires, it
should be handled in accordance with the relevant provisions of
electronic product waste.
5.3 Cleaning
The equipment should be cleaned regularly, and the frequency of
cleaning should be increased in regions with serious environmental
pollution or large wind and sand.
Clean the surface of the equipment by using a soft and clean cloth with
appropriate amount of water.
If the surface of the equipment is stained, it can be wiped with
appropriate amount of soapy water until the stains are removed.
Warning!
Before cleaning the equipment, turn off the power switch and
disconnect the power wire from the outlet.

Related product manuals