the equipment, so the equipment on using state should not close to
mobile phones, microwave ovens and other devices that can generate
strong magnetic fields. If the equipment is intended to be used in an
electromagnetic environment where the radio frequency disturbance
can be controlled, place the equipment according to the
recommended minimum distance to the portable and mobile RF
communication devices in the last table of this appendix, depending
on the maximum output rating of communication devices. Keep away
from communication devices as much as possible to prevent
electromagnetic interference.
⚫ The equipment should not be used in close to or stacked with other
devices. If it must be used close to or stacked with other devices,
observe and confirm that the equipment can work properly under its
configuration of using.
⚫ Electromagnetic compatibility requirements should be considered
when installing and operating the equipment. Please refer to the data
To Next Page
Loading...
