K4C COMPACT-MULTI – INSTALLATION/OPERATION MANUAL
K4C Compact-multi Feb-06
3
2.5 SHUTTING FURNACE DOWN
POWER OFF Turn off main power switch.
FUEL OFF Shut off manual fuel supply valve.
Always keep manual fuel supply valve shut off if the burner is shut down for an
extended period of time.
2.6 RESTARTING FURNACE
Follow this procedure before restarting a unit that has been shut down for an extended
period of time.
INSPECTION Have the furnace/system serviced and inspected by a
qualified technician.
CHECK Furnace/system has not been tampered with.
FUEL ON & CHECK Turn on fuel supply and check that there are no leaks.
POWER ON & CHECK Turn on power switch and check that the furnace starts and
operates as usual.
CHECK If the furnace/system fails to operate or operates in an
unusual manner, call your service technician.
OPERATION If the burner fails to operate at any time, call a qualified
burner technician.
3.0 INSTALLATION
3.1 IMPORTANT
Read this instruction manual thoroughly before installing furnace or starting burner.
Consult local authorities about your local Fire Safety Regulations. All installations must
be in accordance with local state or provincial codes. Improper installation will result in
voiding of warranty.
3.2 CAUTION
DO NOT START THE BURNER UNTIL ALL FITTINGS, COVERS AND DOORS ARE
IN PLACE. DO NOT TAMPER WITH THE FURNACE OR CONTROLS CALL A
QUALIFIED BURNER TECHNICIAN. FOR YOUR SAFETY: DO NOT STORE OR USE
GASOLINE OR OTHER FLAMMABLE VAPOURS AND LIQUIDS IN THE VICINITY OF
THIS OR ANY OTHER APPLIANCE.
To Next Page
Loading...
Need help?
General
