PARADIGM – INSTALLATION/OPERATION MANUAL
Paradigm
2 Jun 10
10.0 Appendix
Figure – 1 Burner Insertion
Figure – 2 Blower Removal
Figure – 3 Oil Tank & Piping
Figure – 4 Wiring Diagram
Figure – 5 Installation Requirements
Figure – 6 Sealing the Burner
Figure – 7 Complete Assembly
Figure – 8 Heat Exchanger Assembly
Figure – 9 Left Side Assembly
Figure – 10 Right Side Assembly
Figure – 11 Wire Channel Assembly
Figure – 12 Combustion Chamber Assembly
Figure – 13 Center Panel Assembly
Keep this manual in a safe place for future reference.
Follow manual carefully for the correct way to install and operate this unit.
Do not operate this furnace until operating instructions have been read and fully understood.
SAVE THESE INSTRUCTIONS FOR REFERENCE
To Next Page
Loading...