KERUI W18 User Manual

Overview of the W18 GSM/WiFi dual-net alarm system.

Highlights TFT display, voice prompts, zone types, and remote controls.

Guidance on optimal host placement for signal reception and avoiding interference.

Steps for inserting SIM, connecting power, and initial system self-testing.

Details on full alarm detection when nobody is home.

How to return the system to a non-alert state after an alarm.

Setting for perimeter detectors to be active while indoor ones are inactive.

How to activate an emergency alarm using a panic key.

Setting alarm, CID, help, and SMS phone numbers.

Managing remote controls, detectors, and smart accessories.

Process for programming wireless detectors to the host.

Procedure for removing programmed detectors from the host.

Includes code matching for strobe sirens and smart sockets.

Accessing various system configuration options.

Enabling/disabling host messages for setting confirmation.

Configuring relay output for alarms.

Enabling voice prompts for arm/disarm operations via remote control.

Scheduling automatic arming and disarming based on time.

Configuring network-related scheduled operations.

Managing low battery alerts and anti-tamper switch functions.

Configuring host behavior upon power loss.

Options for partial or full factory resets.

Recording custom voice messages for alarm calls.

Configuring zone attributes like event codes and types.

Setting specific phone groups for zone alarms.

Adjusting date and time format and values.

Steps to connect the host to a Wi-Fi network.

Accessing alarm and arm/disarm records.

Table detailing SMS commands for system parameter settings.

Instructions for downloading and installing the W18 alarm system APP.

Binding the APP with the host using SMS commands.

Binding the APP with the host using Wi-Fi.

Steps to configure network settings for the W18 device via the APP.

Overview of the APP interface and its key functions.

Adding and deleting alarm telephone numbers within the APP.

Adding and deleting SMS message numbers within the APP.

Viewing the latest alarm records from the host via the APP.

Configuring scheduled arming and disarming times through the APP.

Adding cameras and entering the monitoring screen via the APP.

Modifying device name, password, and other properties via the APP.

Navigating to device management, account, help, and about sections.

Actions to take when the host receives an alarm call.

Steps for operating the host using a phone via remote call.

Detailed technical specifications of the alarm system.

Table showing default zone types and their corresponding ranges.

Table listing factory default settings for the system.

Guide for installing and using door contact sensors.

Instructions for installing and positioning PIR motion detectors.

Common issues and their solutions for the alarm system.